google-site-verification: googlef2ba99a3ab5aecea.html
Showing posts with label tutorial. Show all posts
Showing posts with label tutorial. Show all posts

Sunday, June 21, 2020

Tutorial: Create Your Own (Space Saving) Timeline




I can still vividly remember the first time that I was able to grasp the notion of "time" as a child, and specifically, how long "ago some historical events happened.

Only a good visual aide could have done the job!

I encountered the concept of an extended timeline while watching a TV show.  The show explained that the timeline (featured in the show) started during our current era, and stretched back to the age of the dinosaurs.  Then, the timeline was revealed.  

But, it didn't look like the timelines I was used to seeing printed in the pages of textbooks, or tacked to  classroom walls.  Rather, this was a big THICK roll of paper. The children in the show were given the cylinder to inspect.  

Slowly, the kids on TV set the cylinder on its side, and started to tentatively unroll the paper.  At first, they unrolled a blue section (blue represented how long humans had walked the earth).  Then they continued to curiously and carefully unroll even more. 

As the paper stretched, blue was quickly replaced by other colors (each new color representing an older era in the history of Earth).  Eventually the length of paper stretched all the way across the room.  The kids giggled and unrolled faster.  Suddenly they were out the door!  The roll of paper bounced down the porch steps, and into the yard! 

I watched, mesmerized, as the cylindrical timeline kept rolling and rolling, leaving a multicolored path.  Suddenly, entire ice ages, neanderthals, and the Paleolithic Era all came and went.  The kids on TV laughed with amazement!  They were skipping now, pushing the roll of paper further.  On and on it went, moving down the sidewalk and past other houses.  

Then, at last, a final red section was revealed; they had reached the era of the dinosaurs. And, they had also reached the end of their city block!  I was astonished by how far the timeline had stretched.  To this day, the image of that scene is still cemented in my memory.  

So, I wanted to provide my own children with a similar understanding of time, and with a fantastic visual aid! 






I also wanted a timeline that we could fill out as we learned, so it needed to be easily accessible.  Pinning it high on a wall would not do.  And I wanted them to have the same experience of "unrolling" time. 

So, I came up with an idea for a portable timeline that could be extended and also easily stored away when not in use.




How to Make Your Own File Folder Timeline


First, I adapted a very simple template to the length of time we were going to study (in this case it was North American History).  I modified it the "old fashioned way"  (by using my copy machine, a black colored pencil, a ruler, and plenty of whiteout)!

Click Photo to Purchase


Click photo to purchase




Our timeline goes from 50,000 BCE up to present day.  Because I wanted to start with the first humans migrating across the land bridge from Asia into North America, it goes really far back in time.  So I adjusted the time intervals to be more condensed near the beginning, and more “spread out” as it got closer to the era of United States history.  It’s still really long, and it easily stretches across the whole room!











For fun I added our birthdays too!

Then, using scotch tape I attached each paper together in a long line, and folded the pages like an accordion. I found it worked best to apply the tape so that it would be on the outside of each fold.  

At the end I flipped the entire length of paper over and went along the back horizontally with a length of packing tape too (to make it even stronger). 

Click Photo to Purchase


Click Photo to Purchase



Next, I cut a hanging file folder in half (along the fold/crease) so that it was in two separate pieces.  Then I glued the two ends of the timeline to the inner side of each folder side.  

Click Photo to Purchase


To make it a bit more fun and fancy I made a cover page (by hand, with my favorite brand of colored pencils!). 




*Side note: Prismacolor makes the very BEST colored pencils!  The link above is to a basic set. But, they sell them in much larger sets too. 





I attached the cover page using layers of colorful masking tape, and even added a bit more embellishment with Washi Tape.

Click Photo to Purchase

Click Photo to Purchase



*Note: The washi tape didn't stick very well, so I just went over the ends with more packing tape to reinforce it. 


Right now our timeline lives tucked in with the rest of the books I'm using for our study of US History (in an old magazine rack). 





But as a bonus, it can also be stored in a standard hanging file box too!





I hope this tutorial has been helpful to you.  If you have any questions (or thoughts) please feel free to leave them in the comments section below.  Thanks for stopping by! 

Saturday, February 24, 2018

Grow Real Easter Grass!


Try growing your own Easter grass this year. Right now is the perfect time to get started!


For the tutorial I wrote about this click:

 Here





Thanks for stopping by!


Monday, April 24, 2017

Garage Dance Party Spectacular!

Following on the heels of my most recent posts (about our rainbow party) today I'll be showing you how we transformed our ordinary garage into a rainbow wonderland all ready for a dance party!

Both kids and adults were captivated by this fun and easy to make space. You can make a "room" like this too!


This project was both inexpensive and simple!

Supplies you'll need:

-Rectangular colored plastic table cloths, about 8 of each color. I found most of mine at the Dollar Store.
You can also buy them inexpensively online:



-Packing tape, or duct tape



-A staple gun and staples



Disco ball (this is the one I used):



*Note: The disco ball doesn't run on batteries. It plugs in. So you may need an extension cord too.

-(Optional): Checkerboard floor tiles. These are peel and stick and easy to use. You can just put them right onto the cement in your garage. You'll likely need a scraper to get them off though (or just leave them there and have a neat garage floor!). For a floor about the size of mine (12'x12') you'll need 8 boxes.



It's time to start!


If you chose to make a checkerboard floor, install it first. We centered ours in the middle of the garage, leaving space around the edges for all the junk we keep stashed in there. If you have junk too (as most of us do!) Don't worry about it, we'll hide it later!



If you don't want to stick anything to your floor, you can also rent a checkerboard dance floor from a party/ wedding supply business.

Add lighting


If you have an electric garage door opener, it's possible that you also have an electrical outlet there too. Then you can easily plug in your disco ball. If you don't have one nearby that's okay. Just run an extension cord to your nearest power source. Attach it to the rafters or ceiling to hide it from sight. 


Note: at this point any kids in the household will be ready to dance. Have music ready!

Make a rainbow!

Using your tape, connect the narrow ends of two (same color) table cloths. This should give you enough length to drape it from the center of the ceiling, to close to the floor (of a two car sized garage).



Now it's time to start hanging the sheets of color! I attached one color at a time and worked my way around the room in a circle. 

First I gathered one end of the table cloth into a bundle and wrapped tape around it to secure it together. Then I attached that bunched end to the ceiling directly above the base of the disco ball. 


Leaving a little slack so that it would hang loosely,  then I flared each piece open wider and attached it to the rafters. I made sure it was secured directly above the edge of the dance floor. Then I let the rest of the length just hang down towards the floor. This way I created "walls" for the space.


If you are adhering the table cloths to a wall, or wooden rafters, it's easiest to use a staple gun. But, these are so lightweight that you could even just use tape too. 


Kids will start to get REALLY excited now! Take a break and bust a move!



Keep working your way around the room, creating a "tent" of color. Leave a few feet of empty space for an easy entranceway. And if any parts are too long, simple trim away the access with a pair of scissors. 


Then just add a playlist of fun dance music, turn on the disco lights and enjoy!



Thanks for stoping by, and happy dancing!






For MORE information about how to host your own rainbow party, see these posts:

Rainbow Party Goodie Bags 



DIY Hand Kite Favors





Linking up to these fun parties:


Wednesday, February 22, 2017

DIY Hand Kites (Ribbon Ring)

It's that time of year again in my household: Birthday season!

Luckily all 3 of my kids' birthdays are two weeks apart, so we are able to have one big celebration for everyone. This year I decided to go with a colorful "rainbow" theme.

For the party favor bags, I wanted to be sure to include a handmade element for each child to enjoy. I love providing children with lovingly handmade things to pay with.



But, there were a few requirements. For one, it needed to be something that I could easily produce and in a short time. Also, it had to go with our colorful rainbow theme and be inexpensive.

So, created small Waldorf inspired ribbon rings. These "Hand Kites" were the perfect addition to our favor bags!
They are great fun for throwing and watching them soar through the air, or for simply dancing around with dancing around with. Plus I love that they are also an open ended toy.



Here are the supplies I used for this project:

Wooden rings:


Clored ribbon. (I used two packs of this to make about 20 rings)


Sharp Scissors 



From there it was super easy to make these!

First:

I chose 3 coordinating colors to use for each ring. Usually I used analogous colors (or colors that are next to each other of the color wheel). Then, I empty an entire spool of ribbon, and cut the length of it exactly in half.

 

Each (half length) strand of ribbon was the perfect length for one ring. 

Then: 

The next step was super easy too. I looped the ribbon through itself to secure it onto the ring, leaving one side much longer than the other. Then, I pulled it tight. 

 

To make sure that they held up to rough play, I further tied one end of each ribbon securely onto the wooden ring. Then, I snipped off any access  ribbon (from the short ends) near the knots. 



Lastly:

To dress them up a little, and keep the ribbon from unraveling, By making one diagonal cut, I cut a "v" shape in the end of each ribbon. Sharp sewing scissors make this step much easier.



Simply hold the ribbon between your fingers, pinch it in half and make a diagonal cut across the folded ribbon (pointing towards the wooden ring). Essentially you want to cut out a small triangle.


Lastly, enjoy and share your colorful creations! They are great for tossing through the air, dancing or anything else your imagination can think of.




That's all, and thanks for stopping by!


Linking up to these great parties:

http://www.gingersnapcrafts.com/2017/02/wow-me-wednesday-287.html
http://www.mygirlishwhims.com/2017/02/your-whims-wednesday-295-and-features.html
http://www.savvysouthernstyle.net/2017/02/wow-us-wednesdays-314.html
http://www.colorsandcraft.com/blog/2017/2/share-it-link-party-258
http://thediydreamer.com/from-dream-to-reality/share-crafts-diy-projects-255/
http://www.uptodateinteriors.com/2017/02/the-creative-circle-no-104.html
http://staceyembracingchange.com/2017/02/23/creative-inpirations-linky-party-and-features/